Print guide
For each part, this page says what to order from a print shop or how to print it at home. The same text is included as a PDF in every set.
Everything except the board can be skipped. Whatever you skip, you take from your own box: the cards, money and pawns of the game you already own stay in use. Only the board is required, because it is the part that shows your streets. On the print page you untick every part you do not want to print.
You can mix parts from the print-shop set and the home-print set. For example, have the board printed at a shop and print the money at home.
Start with the proof sheet
Print the proof sheet on A4 at actual size, never on "fit to page". The sheet has a 100 mm ruler, the outline of a bank card (85.60 × 53.98 mm) and a test print of a corner space and a regular space, with their sizes.
Lay a bank card on the outline. If it fits exactly and the ruler measures 100 mm, your printer is scaling correctly. Then lay the corner space on your board. If it fits, you can order or print the rest. If it does not, enter the measurements of your board in the settings of your edition.
The proof sheet is not part of the print-shop order. You print that one yourself, at home or at a copy shop.
Printing at home: what you need
Printing at home saves the print shop, but it takes time. Plan on an evening: roughly an hour or two for the board (cutting out more than 40 spaces) and another two hours for the cards (cutting, folding and gluing). The play money is quicker.
You need:
- A sharp craft knife or sharp scissors. A knife gives cleaner straight edges.
- A metal ruler. A plastic one gets nicked quickly.
- A cutting mat, or a piece of thick cardboard under the paper.
- Sticker paper for your printer: A4, matte, for inkjet or laser. The packaging says which.
- Paper of 160 to 200 gsm for the cards. Check your printer manual first, because many home printers stop at about 160 gsm. If yours cannot take it, print on plain paper and glue the card to cardboard.
- Glue for the fold cards: a glue stick or double-sided tape. Wet glue makes the paper wavy.
- A bank card, to press the stickers down and to check the proof sheet.
Always print at actual size. Each program words it a little differently:
- Browser (Chrome, Edge, Firefox): set "Scale" to "Default" or 100%. Turn off "Fit to page" and choose "None" for margins.
- Adobe Reader: under "Page Sizing & Handling" choose "Actual size". If it says "Fit" or "Shrink oversized pages", the print will be scaled.
- Preview on a Mac: untick "Scale to fit" and set "Scale" to 100%.
Check it with the proof sheet: the ruler on it must measure exactly 100 mm.
Checklist before you start:
- The proof sheet is printed and the ruler measures 100 mm.
- The bank card fits exactly on the outline.
- The sticker paper and card paper suit your printer.
- You have a sharp knife, a metal ruler and a cutting mat.
- You have glue for the fold cards.
- You have a few hours to spare.
Board
A modern board is square, about 50 × 50 cm. The size differs a few millimetres between releases, so the site works from the board profile of your edition. The board is a sticker for the board you already own.
At the print shop
Order as custom-size vinyl sticker, white, matte laminated, with repositionable adhesive. The panels are named A to D. They stop 1 mm before each fold line, because a sticker across a fold tears or creases. Upload each PDF as it is.
4 pieces · each 248 × 248 mm · 3 mm bleed (page 254 × 254 mm)
At home
Buy full A4 sticker sheets, matte, for your type of printer (inkjet or laser). Each space is a separate sticker and the centre comes in four pieces. Print at actual size and cut with a knife along a ruler.
7 A4 sheets for the standard board · spaces 0.5 mm smaller than on the board
Sticking it on
- 1. Degrease the board and fit each panel dry first.
- 2. Lay panel A against the outer corner of the board and pull off 5 cm of backing paper.
- 3. Press down with a bank card, from the middle outward, and peel off the rest of the backing slowly. Do the same with panels B, C and D.
- 4. Fold the board and check that the fold is free. If a sticker touches the fold, peel it off and place it again.
For the home version, start at Go and work along the edge. If an air bubble is trapped, prick it with a pin and smooth it out.
Cards and deeds
The cards of your old game can go. You print the Chance cards, the Community Chest cards and the title deeds new, front and back. That is 16 Chance cards, 16 Community Chest cards and 28 title deeds.
At the print shop
Order as a card set with a custom design per card, 350 gsm matte, rounded corners. Upload the PDF as it is: each card is on its own page, front and back alternating, with 3 mm bleed.
60 cards (61 with the house rules card) · 63 × 88 mm · each with its own front and back
At home
Print the fold cards on 160 to 200 gsm matte paper. Front and back sit side by side, because double-sided printing shifts on almost every home printer. Cut with a knife along a ruler, fold along the dotted line and glue the halves together.
15 sheets A4 landscape (16 with the house rules card) · 4 cards per sheet
Play money
The play money is its own design with the word "play money" on it, and it does not look like real banknotes. There are 210 notes: 30 of each denomination (1, 5, 10, 20, 50, 100 and 500).
At the copy shop
Have the money printed on 90 to 120 gsm paper and cut on the crop marks. Choose SRA3 or A3.
15 sheets SRA3
At home
Print on plain A4 paper of 90 to 120 gsm and cut on the crop marks.
35 sheets A4
Pawns
Pawns are fold-up stands with a tab foot. Fold along the lines and push the foot into the slot.
At the print shop
Print them on 350 gsm.
1 sheet A4
At home
At home, 200 gsm works too.
1 sheet A4
Box lid
The box lid is a sticker at the size from your board profile.
At the print shop
Order it as custom-size vinyl sticker, matte.
1 piece · about 267 × 267 mm
At home
Print it on a sticker sheet. If the lid does not fit on A4, use A3.
about 267 × 267 mm
If something goes wrong
A white edge after cutting usually means the printer scaled the page. Print the proof sheet again and choose "actual size". If a photo looks grainy, check the Review list in the editor: the site warns below 150 dpi, and around 300 dpi is sharp. Dull colours usually come from the paper or the print shop. Ask for a test print of one corner space if you want to be sure.